Heavy Duty Automatic Face Mask Making Machine
Equipment characteristics
- The machine adopts aluminum alloy structure, small size, stable operation and low scrap rate;
- With photoelectric detection, automatic counting, can control the production speed and high output;
- It can produce about 100 pieces per minute, and can produce (3-6 layers) multi-layer masks.
- You can adjust the size of the mask blank and the folding location.
- The whole line include face mask blank making machine and outside earloop welding machine
Equipment Features
- Automatic tension control of raw materials to ensure the balance of tension of raw materials;
- Photoelectric detection of raw materials to reduce the waste of materials, plus voice-activated alarm and stop;
- The equipment is enabled total quantity counting and single-stack counting, which is convenient for the post-process connecting to the sterilization packing line;
- Modular/humanized design for easy maintenance;
- The whole machine is made of aluminum alloy, sheet metal and chrome-plated steel. It is good-looking, durable and anti-rust, causing no pollute to the environment.
- Full servo action is adopted in the ear-loop welding to achieve energy-saving and high-speed;
- The entire production line requires two operators, one is responsible for the operation of the machine and the replacement of the raw material rolls; another is responsible for collecting the finished product mask and arranging the boxes in an orderly manner; the person supervising the machine can take care of multiple machines at the same time.
Main electrical parts:
| Main machine configuration | Variable frequency motor | 1 set |
| Ultrasound | 2 sets |
| plc control | 1 set |
| electronic eyes | 2 sets |
| Ear strap machine configuration | Frequency conversion motor | 2 sets |
| Stepper motor | 4 sets |
| cylinder12 | 16 sets |
| Ultrasound | 4sets |
| Electronic Eye | 10sets |
| Conveying configuration | speed control motor | 2 sets |
- To meet the requirements of product specifications: This equipment suits for producing adult ear belt mask under 4 layers (without edge sealing). The size of the mask is 175mm * 95mm;
- The following raw material specifications are recommended:
- PP spunbond PPSB: 200mm * 36g, melt-blown: 195mm * 28g, PP spunbond PPSB: 195mm * 18g, nose wire: single-core universal type
- Technical specifications:
- Model No.: High-Speed Servo Welding Flat Ear-Loop Mask Machine
- Machine Dimensions: 4,210mm long * 2,280mm wide * 1,985 high
- Total weight of machine: about 2300 KG
- Mask specifications: 175mm * 95mm (for adult)
- Production speed: over 85pcs/min (normal 5000/ h)
- Power Source: Single-phase AC, 220V, 50HZ, 9.8KW
- Gas source: 5-7bar (gas source up to 180L/ min)
- Control mode: PLC control + touch screen operation
Product parameters
| Maximum width of bag-making machine | 500mm |
| maximal length | 1200mm |
| Production speed | 180-200 piece/min |
| Main motor power | 1.1kw |
| Electric heating power | 2kw |
| Voltage | 220v/50hz |
| machine weight | 700kg |
| Dimension | 3600*1300*1700mm |
| The thickness of the apron | 0.01-0.08mm |
| Compressed air | 0.5-0.7Mpa |
Product features
1. Automatically.
2. Advanced ultrasonic welding technology:
3. Stable performance and low failure rate
4. Low noise and small floor area
5. Aluminum alloy structure, no rust, long service life
Product Application
This machine is mainly used to make quality and safety masks, suitable for all industries that need masks, such as medical, electronics, mining, construction, labor insurance, food, cleaning and sanitation.
